Volume 513
Main Index

Issues 1-2, Pages 1-128 (20 January 2011)

Editorial Board Page iii

On the crystallization kinetics of In additive Se–Te chalcogenide glasses Pages 1-8 Balbir Singh Patial, Nagesh Thakur, S.K. Tripathi

Comparison of analytic and numerical solutions for a burning soot bed in confined walls Pages 9-19 Chunsung Lee, Byunghwa Lee, Gyubo Kim, Chunghwan Jeon, Youngjune Chang, Juhun Song

Correlation of mechanical and chemical cure development for phenol–formaldehyde resin bonded wood joints Pages 20-25 Jinwu Wang, Marie-Pierre G. Laborie, Michael P. Wolcott

Volume-related interaction parameters for dilute solutions of 1,3-dimethylpropyleneurea in normal and heavy water between 278.15 K and 318.15 K Pages 26-32 Evgeniy V. Ivanov, Elena Yu. Lebedeva, Vladimir K. Abrosimov

An in-depth in situ IR study of the thermal decomposition of barium trifluoroacetate hydrate Pages 33-37 M. Mosiadz, K.L. Juda, S.C. Hopkins, J. Soloducho, B.A. Glowacki

Thermodynamic studies on Ba2.875UO5.875(s) Pages 38-42 Smruti Dash, Ziley Singh

Thermochemistry and kinetics of silica dissolution in NaOH aqueous solution Pages 43-48 Meriem Fertani-Gmati, Mohamed Jemal

Thermal analysis of phase change materials in the temperature range 120–150 °C Pages 49-59 D. Haillot, T. Bauer, U. Kröner, R. Tamme

Understanding of thermo-gravimetric analysis to calculate number of addends in multifunctional hemi-ortho ester derivatives of fullerenol Pages 60-67 Rachana Singh, Thakohari Goswami

Partial molar volumes, expansibilities and compressibilities of glyglyglycine in aqueous sucrose and fructose solutions between 288.15 and 308.15 K Pages 68-74 Amalendu Pal, Nalin Chauhan

Flame retardancy and thermal degradation of cotton textiles based on UV-curable flame retardant coatings Pages 75-82 Weiyi Xing, Ganxin Jie, Lei Song, Shuang Hu, Xiaoqi Lv, Xin Wang, Yuan Hu

Predictive model for the heat capacity of ionic liquids using the mass connectivity index Pages 83-87 José O. Valderrama, Gwendolyn Martinez, Roberto E. Rojas

Thermal properties and cure kinetics of a liquid crystalline epoxy resin with biphenyl-aromatic ester mesogen Pages 88-93 Yin-Ling Liu, Zhi-Qi Cai, Xiufang Wen, Pihui Pi, Dafeng Zheng, Jiang Cheng, Zhuoru Yang

Temperature dependence of the oxidative stability of corn oil and polyalphaolefin in the presence of sulfides Pages 94-99 Grigor B. Bantchev, Girma Biresaw, Abdellatif Mohamed, Jill Moser

Heat contents of the intermetallics V3Ge and V5Ge3 and thermodynamic modeling of the Ge–V system Pages 100-105 Xiaoming Yuan, Weihua Sun, Yoonsung Chung, Honghui Xu, Shuhong Liu, Yong Du, Philip Nash, Dewen Zeng

Heat flow calorimetry and SEM investigations to characterize the hydration at different temperatures of different 12CaO·Al2O3 (C12A7) samples synthesized by solid state reaction, polymer precursor process and glycine nitrate process Pages 106-111 B. Raab, H. Poellmann

Isomorphism and phase diagram of Pb5(PO4)3F–Pb5(PO4)3Cl system Pages 112-118 A.V. Knyazev, N.G. Chernorukov, E.N. Bulanov

Effect of different additives on the thermal properties and combustion characteristics of pyrotechnic mixtures containing the KClO4/Mg–Al alloy Pages 119-123 Dehua Ouyang, Gongpei Pan, Hua Guan, Chenguang Zhu, Xin Chen

Formation enthalpies and thermodynamics of some reactions of the Bi12.5R1.5ReO24.5 (R = Y, Nd, La) compounds Pages 124-127 A.N. Bryzgalova, N.I. Matskevich, C. Greaves, C.H. Hervoches